Maintenance - Maintenance Manager

1. Develop and maintain PM program
2. Purchase MRO items
3. Troubleshoot problems.
4. Wire all new equipment.
5. Help with millwright projects.
6. Supply own tools
7. Schedule new projects and any outside labor needed.

Maintenance - Technician

1. Fabricating
2. Repair/rebuild equipment
3. Use cutting torch and welder
4. Lubricate equipment
5. Rebuild machinery
6. Supply own tools

Maintenance ? Carpenter

1. All building maintenance
2. Construct all new projects
3. Keep grounds clean
4. Supply own tools
5. Change filters
6. Run for parts

Extrusion- Leadperson

1. Fill in for supervisor when needed
2. Set up orders
3. QC overall order setup
4. Overall QC control on order setups
5. Double check documentation
6. Minor maintenance
7. Ensure employees understand work instructions
8. Train employees
9. Learn heat profiles, check heat profiles
10. Help with daily production
11. Drive Hi-Lo
12. Make adjustments to machines
13. Help keep check on inventory
14. Help in other jobs as needed
15. Listen to complaints and notify supervisor
16. Maintain silos ? days
17. See supervisor jobs #13 and #14
18. Setup treaters
19. Ensure properly equipped

Extrusion-Supervisor

1. Check rates and orders running upon arrival. work instructions
2. Set up orders
3. Help keep shift organized
4. Minor maintenance
5. Work with and inform personnel
6. Train employees in extrusion
7. Maintain safety policies
8. Daily production report
9. Listen and deal with complaints
10. Check on inventory
11. Address machine problems and rate and order information
12. Make machine adjustments
13. Make computer labels
14. Setup printers
15. Enforce company policies
16. Oversee shift for smooth operation

Extrusion- Setup Person

1. Learn responsibilities of a leadperson
2. Perform tower work
3. Do setups
4. Adjust machines
5. Drive Hi-Lo
6. Check orders for Quality, etc.
7. Help make boxes and band scrap
8. Follow safety procedures
9. Help with roll changes
10. Fill out computer labels
11. Setup printers- when needed
12. Setup treater- when needed
13. Housekeeping
14. Train employees
15. Check rates

Extrusion- Blender Operator / Resin Handler

1. Keep machine supplied with resin
2. Check order sheets and be prepared for the next order
3. Mix special resins
4. Drive Hi-lo to get resin and concentrate
5. Mix concentrates and keep blenders full
6. Keep a check on pounds to ensure little or no excess on change
7. Keep back organized
8. Draw in material
9. Box and label excess material for future use
10. Basic inventory on concentrates and boxed resin
11. Help up front when needed
12. Keep material supplied to reclaim system
13. Make sure hopper alarms are on
14. Follow safety procedures
15. General housekeeping
16. Fill out material handlers? log
17. Keep resin cleaned up from railcars

Extrusion- Roll Changer

1. Ensure rolls are changes properly and are on footage
2. Measure and record film after cutting roll
3. Ensure film opens properly, check for knife, when applicable
4. If needed, box rolls
5. If needed, check treat
6. Weigh roll, write roll on tally sheet and put on skid. Keep an accurate count
7. Write roll ticket and put in correct roll
8. Wrap skid and label properly
9. Sweep floor
10. Clean printers when needed
11. Cut scrap and make boxes
12. Confirm order when removing a roll
13. Initial rolls for which you are responsible
14. Protect ends of roll stock on skid
15. Screen changes

Extrusion ? Core Cutter

1. Read orders for core specs and cut cores
2. Keep cores supplied to machine
3. Help roll changers
4. Sort cores
5. Cut scrap and make boxes
6. Screen changes
7. Housekeeping

Administration - VP of Logistics

1. Scheduling
2. Direct and manage all purchasing and logistics functions
3. Completes processing information on orders
4. Complete monthly inventory and do inventory checks as needed
5. Administration of the safety program
6. Fill in for VP of Manufacturing, as needed

Administration - VP of Manufacturing

1. Schedule vacations and time off for extrusion and conversion personnel
2. Spot-check order rates
3. Responsible for overseeing all extrusion and maintenance related issues
4. Address quality problems in extrusion or converting.\Work with supervisors to ensure everything is done
5. Perform employee reviews
6. Employee training
7. Act as Management Representative for quality system
8. Ensure entire plant runs smoothly
9. Give employee reviews
10. Order new equipment
11. Handle complaints

Conversion ? Supervisor

1. Start shift on time
2. Ensure machines are running at or above rate speed
3. Perform QC checks and ensure operators are following guidelines
4. Enforce company policies, listen to employees
5. Set-up machines
6. Make boxes and cut cores
7. Pull film for the day
8. Take out skids
9. Log finished orders
10. Fix machines and do repairs, maintenance
11. Order parts
12. Train employees
13. Drive Hi-Lo
14. Make sure dock is clean
15. Band bailer

Conversion ? Leadperson

1. Start shift on time
2. Ensure machines are running at or above rate speed
3. Perform QC checks and ensure operators are following guidelines
4. Enforce company policies, listen to employees
5. Set-up machines
6. Make boxes and cut cores
7. Take out skids
8. Log finished orders
9. Fix machines and do repairs, maintenance
10. Train employees
11. Run machines, when needed
12. Cover for supervisor, when needed
13. Drive Hi-Lo
14. Band bailer

Conversion ? IC Operator

1. Read order completely
2. Clean machine if dirty
3. Check film to ensure correct order is behind machine
4. Seal rolls on back
5. Check size and seals
6. Label boxes and ensure count is ok when bags are placed into boxes
7. Sign out skid and put on order
8. Perform QC checks

Conversion ? POR Operator

1. Machine Setup
2. Minor machine repair
3. Make cartons and cut cores
4. Check production orders
5. Complete production reports
6. Drive Hi-Lo
7. Perform QC checks
8. Train new employees
9. Run IC machine when needed

Warehouse - Transportation Coordinator

1. Schedule trucks and drivers for deliveries
2. Ensure drivers are loading trucks properly and checking BOLs
3. Work with outside carriers to schedule pickups and deliveries and use quickest routes
4. Perform warehouse personnel reviews
5. Ensure freight is being delivered on time
6. Create bills of lading (BOLs)
7. Inventory control / perform inventory each month
8. Order supplies at best cost
9. Verifying all warehouse paperwork for correctness
10. Assist drivers when needed

Warehouse ? Truck Driver

1. Wrap skids and put in staging area
2. Match up bill of lading (BOL) with skids and check count
3. Load trucks
4. Maintain trucks
5. Make deliveries
6. Give BOL copies to proper locations
7. Complete all necessary paperwork
8. Drive Hi-lo
9. Housekeeping
10. Inventory
11. Conform to all DOT regulations
12. Repair skids

Laboratory - Laboratory Manager

1. Overall responsibility for laboratory projects
2. Overall responsibility for laboratory equipment
3. Address processing problems, as needed
4. Perform incoming raw materials QC
5. ISO 9000 management representative
6. Calibration coordinator, overall responsibility for calibration system
7. Perform product QC, QA, and laboratory testing
8. Perform lab technician duties, as needed (backup person)

Laboratory ? Laboratory Coordinator

1. TNG
2. Audits
3. Inspection
4. OPTO
5. Final Inspection
6. Six 6bProgram
7. Quality Manual / Procedures
8. SPC
9. Safety
10. Complaints & Returns
11. Supplier Management
12. Scrap / Procudtion
13. DMF 8686

Laboratory - Laboratory Technician

1. Perform incoming materials and product QC and QA, as needed
2. Perform laboratory testing
3. Complete laboratory reports and Certificates of Compliance
4. Run daily production reports
5. Run opto (extrusion weighing measurements) reports
6. Assist extrusion and converting departments with processing problems
7. QC daily production samples (backup person)
8. Make customer samples
9. Calibration of tools and equipment
10. Warehouse
11. Complete Certificates of Analysis
12. Labeling
13. External Standards
14. Inspection

Laboratory ? Lab Assistant

1. Make customer samples
2. QC daily production samples
3. Perform laboratory testing

Administration- Human Resources Manager

1. Accounts receivable duties
2. Administration duties
3. Human resources duties

Administration- Plant Accountant

1. Accounts payable duties
2. Assist director of operations with purchasing duties

Administration ? Customer Service

1. Submit samples to lab
2. Give quotes to customers
3. Take customers? orders
4. Acknowledge and place orders
5. Complete paperwork and use computer

Administration ? Packaging, Scheduling, and Pricing Manager

1. Determine prices
2. Give quotes to customers
3. Submit samples to lab
4. Determine what resins to use on orders
5. Fill in for customer support as needed